![](image/blue-line.gif)
TYPE : BXH
![]() |
![]() |
Suitable for heavy duty drilling use. |
![]() |
By using anti-thrust bearing to increase the gripping power, so that, high speed drilling can be performed |
![]() |
All parts hardened by heat treatment and precision ground precision can be lasted, super clamping power. |
Type | Clamping Capacity | Female Taper DIN or Jacobs |
10BXH | 1-10(mm) ; 1/32"-3/8" (inch) |
J2S
|
13BXH | 1-13(mm) ; 1/32-1/2 " (inch) |
J3 ; J6
|
16BXH | 1-16(mm) ; 1/32"-5/8 " (inch) |
J3
|
19BXH | 1-19(mm) ; 1/32"-3/4 " (inch) |
J4
|
25BXH | 5-25(mm) ; 3/16"-1 " (inch) |
J5
|
![]() |
Run-out Accuracy & Torsion Inspection Table
|
Material Analysis Table |
|||
Parts No. | Parts Name | Material | Heat-Treatment |
1 | Body | JIS 4051 SAE 1045 | HRC45-48 |
2 | Conical sleevve | JIS 4018 SAE 1018 |
HRC38-40 |
3 | Jaws | JIS SUJ2 SAE 52100 |
HRC55 ± 2 |
4 | Nut | JIS SUJ2 SAE 52100 |
HRC60 ± 2 |
5 | JIS SUJ2 SAE 52100 |
HRC60 ± 2 | |
6 | Ball | JIS G4018 SAE 1018 |
DRILL CHUCK ADAPTERS
![](image/blue-line.gif)
TYPE | Front View | Dmm | Lmm | 1 Pcs(g) | Q,ty Pcs/ Cu-FT | N.W/ G.W kgs |
![]() 3GO-THRU SLOT ORDER NO.17001 |
![]() |
10 | 44 | 50 | 500/0.85 | 25/26 |
![]() 2GO-THRU SLOT ORDER NO.17002 |
![]() |
10 | 44 | 50 | 500/0.85 | 25/26 |
![]() ORDER NO.17003 |
![]() |
9.35 | 38 | 48 | 500/0.85 | 24/25 |
![]() 3GO-THRU SLOT ORDER NO.17005 |
![]() |
10 | 44 | 50 | 500/0.85 | 25/26 |
![]() 2GO-THRU SLOT ORDER NO.17006 |
![]() |
10 | 44 | 50 | 500/0.85 | 25/26 |
TAPER SHANK ARBORS WITH TANG
FOR DRILL CHUCKS
![](image/blue-line.gif)
![]() |
MORSE TAPER MTType | ORDER NO | DRILL CHUCK TAPER | |||||||||||
DIN 238 | JACOBS | ||||||||||||
B10 | B12 | B16 | B18 | B22 | B24 | 1 | 2A | 3 | 6 | 33 | 4 | ||
1 | 15001 | 15002 | 15003 | 15004 | 15005 | 15006 | 15008 | 15000 | |||||
2 | 15009 | 15010 | 15011 | 15012 | 15022 | 15015 | 15016 | 15017 | 15018 | ||||
3 | 15020 | 15021 | 15030 | 15031 | 15024 | 15025 | 15026 | 15026 | 15042 | ||||
4 | 15028 | 15029 | 15045 | 15046 | 15032 | 15033 | 15039 | 15040 |
REDUCING SLEEVES
![](image/blue-line.gif)
![]() |
EXTERNAL TAPER MT | 1 | 2 | 3 | 3 | 4 | 4 | 4 |
INTERNAL TAPER MT | 0 | 1 | 2 | 1 | 3 | 2 | 1 |
LENGTH mm | 80 | 92 | 112 | 99 | 140 | 124 | 124 |
WEIIGHT APPROX. g | 30 | 95 | 190 | 250 | 360 | 480 | 550 |
ORDER NO. | 16001 | 16002 | 16003 | 16004 | 16005 | 16006 | 16007 |
EXTERNAL TAPER MT | 5 | 5 | 5 | 5 | 6 | 6 | 6 | 6 |
INTERNAL TAPER MT | 4 | 3 | 2 | 1 | 5 | 4 | 3 | 2 |
LENGTH mm | 171 | 156 | 156 | 156 | 218 | 218 | 218 | 218 |
WEIIGHT APPROX. g | 950 | 1360 | 1520 | 1700 | 2550 | 3600 | 4100 | 4300 |
ORDER NO. | 16008 | 16009 | 16010 | 16011 | 16012 | 16013 | 16014 | 16015 |
HAND-TIGHTENED KEYLESS DRILL CHUCKS
![](image/blue-line.gif)
![]() |
![]() |
Tremendously enhance gripping power than traditional key type drill chucks. |
![]() |
Very easy and convenient for bit changeover. |
![]() |
Eliminates "lost key" problems. |
![]() |
Resists impact damage and rust-free by its high quality engineered plastic body. |
![]() |
100% inspection for every chucks, quality guaranteed. |
![]() |
To be used for original equipment on new power tools or replacement chucks. |
Type | Clamping
Capacity mm inch |
Female Taper DIN or Jacobs | Female Thread Inch or metric | OUTER
|
Length | W t g | QTY PCS/ Cu-FU | N.W./G.W kgs |
Order No. | ||
open B mm |
closed C mm |
||||||||||
10KS | 1-10 1-32"-3/8" |
ø 5.5X90o | 3/8-24 | 40 | 55 | 65 | 160 | 60/0.6 | 9/10 | 13100 | |
13KS | 1-13 | 1/2-20 |
|
|